Hi all,
sorry that there hasn't been any post pyrography or scroll sawing posts recently, after five months of waiting we finally managed to move house. That's the good news; the bad news is that there are still boxes everywhere and list of jobs to do which is longer than the M6.
I don't think I will be doing any pyrography or scroll sawing in the near future but I will start my posts again as soon as possible.
The move itself was a disaster because we didn't manage to get the keys until 3:40 pm and had to pay the removals people a van load of money for waiting time. Needless to say the boxes came off the vans very quickly and we lost control of the situation and boxes ended up everywhere despite our preparation.
Still we are in now and although we have a lot of work ahead we are pleased with the house and the fact that we have moved to a better area.
Thursday, 6 February 2014
Monday, 13 January 2014
Band Saw Box
Hi all,
We are still waiting to move house, so once again this post is coming from a precarious hot spot.
In my last post, I showed you a drawing of a band saw box that I was going to attempt. Well I've finished it and I'm very pleased with the result.
Until recently I'd never heard of a band saw box, so I looked it up on Google. I was quite amazed by what I saw, so I watched a few being made on You Tube.
These boxes are supposed to be made, as the name suggests, on a band saw because it has a much greater depth of cut than a scroll saw. Anyway, I wanted to make a band saw box but there was no way I was going to lash out on a band saw because a decent one costs serious money. So, I would have to do it with my scroll saw which according to some people couldn't be done.
Well here is a picture of my finished box. It could have probably taken a little more time on the finish, but seeing as this was my first attempt at a band saw box and that I'd used

a cheap piece of pine from B&Q and there is a limit to how much sanding I wanted to do. Now, if you are wondering why there is a difference between making a band saw box on a band saw and making one on a scroll saw, here are the differences.
To make a band saw box on a band saw, you first laminate or stick several pieces of wood together to form a block onto a which design is stuck and then the box it cut out in several piece.
Doing it on a scroll saw is different in as much as the design is stuck onto several pieces of wood which are then cut out and then stuck together. Greater care needs to be taken when doing on a scroll saw because each cut needs to be identical. Having said that a lot of the skill comes in the sanding because it here that band saw box takes on a look of its own.
If you own a scroll saw it is worth giving it a go because the results can be spectacular.
If you need more information on how it is done please let me know and I will get back to you when a hotspot allows. Who knows, by the time I make my next post I might even have moved, but that would probably be too much to hope for after 18 weeks of waiting.
We are still waiting to move house, so once again this post is coming from a precarious hot spot.
In my last post, I showed you a drawing of a band saw box that I was going to attempt. Well I've finished it and I'm very pleased with the result.
Until recently I'd never heard of a band saw box, so I looked it up on Google. I was quite amazed by what I saw, so I watched a few being made on You Tube.
These boxes are supposed to be made, as the name suggests, on a band saw because it has a much greater depth of cut than a scroll saw. Anyway, I wanted to make a band saw box but there was no way I was going to lash out on a band saw because a decent one costs serious money. So, I would have to do it with my scroll saw which according to some people couldn't be done.
Well here is a picture of my finished box. It could have probably taken a little more time on the finish, but seeing as this was my first attempt at a band saw box and that I'd used

a cheap piece of pine from B&Q and there is a limit to how much sanding I wanted to do. Now, if you are wondering why there is a difference between making a band saw box on a band saw and making one on a scroll saw, here are the differences.
To make a band saw box on a band saw, you first laminate or stick several pieces of wood together to form a block onto a which design is stuck and then the box it cut out in several piece.
Doing it on a scroll saw is different in as much as the design is stuck onto several pieces of wood which are then cut out and then stuck together. Greater care needs to be taken when doing on a scroll saw because each cut needs to be identical. Having said that a lot of the skill comes in the sanding because it here that band saw box takes on a look of its own.
If you own a scroll saw it is worth giving it a go because the results can be spectacular.
If you need more information on how it is done please let me know and I will get back to you when a hotspot allows. Who knows, by the time I make my next post I might even have moved, but that would probably be too much to hope for after 18 weeks of waiting.
Tuesday, 7 January 2014
Band Saw Boxes
Hi all,
We still haven't moved house, so this post is coming via a hot spot again. The signal is poor, so it will be a quick one. Over the Christmas period my wife Terry decided to try and forget her woes by doing a bit of pyrography. Here is a photo of what she did. It is a nice autumnal scene and at the rate we are going that's when we'll move house.
As you can see she did a great job with the pyrography but she then wanted to add some colour. She painted the leaves with watercolour paint, which she says gives her a more delicate tone on the wood. Acrylics have many good properties but they do tend to be a bit garish. The plaque was fined with spray lacquer because the brush on stuff would make the paint run.
I think she did a good job, but has now gone back into moving mode. To that end her days are split between planning what she is going to do in the new house, deciding what she can buy for it and shouting a solicitors.
I on the other hand decided to use the time to work on my new book and I am pleased to tell you that I have written 16,000 words and it is going well. Target day for publication is April.
I haven't managed to do any pyrography during the last few days, but I have been working on a design for a band saw box, which you can see below. They are made on a band saw, I reckon I could do just as well on my scroll saw; perhaps I'm deluded, but we'll see.
If you've never heard of a band saw box, you are in good company because neither had I until a few weeks ago and they are quite interesting.
In my next post I hope to show you how I made a band saw box on my scroll saw and that should prove to be interesting.
By the way, I'm sorry if you find any spelling or grammer issues in this posts but I haven't brought my prooofreader (the wife) with me. She said something about wasting time sitting about in a cold car when she could be giving an estate agent or solicitor a bit of verbal encouragement.
We still haven't moved house, so this post is coming via a hot spot again. The signal is poor, so it will be a quick one. Over the Christmas period my wife Terry decided to try and forget her woes by doing a bit of pyrography. Here is a photo of what she did. It is a nice autumnal scene and at the rate we are going that's when we'll move house.
As you can see she did a great job with the pyrography but she then wanted to add some colour. She painted the leaves with watercolour paint, which she says gives her a more delicate tone on the wood. Acrylics have many good properties but they do tend to be a bit garish. The plaque was fined with spray lacquer because the brush on stuff would make the paint run.
I think she did a good job, but has now gone back into moving mode. To that end her days are split between planning what she is going to do in the new house, deciding what she can buy for it and shouting a solicitors.
I on the other hand decided to use the time to work on my new book and I am pleased to tell you that I have written 16,000 words and it is going well. Target day for publication is April.
I haven't managed to do any pyrography during the last few days, but I have been working on a design for a band saw box, which you can see below. They are made on a band saw, I reckon I could do just as well on my scroll saw; perhaps I'm deluded, but we'll see.
If you've never heard of a band saw box, you are in good company because neither had I until a few weeks ago and they are quite interesting.
In my next post I hope to show you how I made a band saw box on my scroll saw and that should prove to be interesting.
By the way, I'm sorry if you find any spelling or grammer issues in this posts but I haven't brought my prooofreader (the wife) with me. She said something about wasting time sitting about in a cold car when she could be giving an estate agent or solicitor a bit of verbal encouragement.
Wednesday, 1 January 2014
In Layed Pencil Box
Hi All,
Happy new year to all of you. Let's hope it's a good one.
In my last post I showed you the drawing of the top of a pencil box. I managed to finish it over the Christmas period and give it to my wife as a present for her to keep her pretty pens in.
I made the box from a small piece of American cherry that was 4 inches wide, 18 inches long and a quarter of an inch thick. The sides of the box weren't very high so I did a single box joint on each corner. All of the cutting was done on my scroll saw. I used a size 12 blade for the straight cuts and a size five for the more intricate bits on the lid.
Cutting the lid was tricky in parts especially were the Damsel Fly met the reeds. I also had to leave some bits of wood intact and use my pyrography iron to complete the design. This can be seen on the bodies and heads of the Damsel Flies and the legs.
After cutting out the design and doing the pyrography work I cut out a piece of 3mm plywood and stuck it to the under side of the lid. Care had to be taken with the positioning because this would have to fit snugly into the top of the box to position the lid and stop it sliding off. Its other purpose was to stop the polymer clay, that I was going to use to fill the fretwork, from dropping out through the bottom of the lid.
The in lay work was done by mixing blue and yellow clays together to make a green, which was then pushed into the reeds with the back of a craft knife blade. For the body I used a blue clay with a little white added to give it the right hue.
Lastly, I did the wings. These were filled with a clay mixed from white and translucent. I didn't mix the clay thoroughly and this gave the wings a marbled look. The photo doesn't really do it justice because it worked out rather well.
After baking the lid in the oven, I used a very fine sand paper to rub it down and then gave it a coat of sanding sealer. Once that was dry, I gave it a couple of coats of varnish to finish it off then put a layer of felt on the inside and on the bottom of the box.
I was pleased with the way it turned out, but disappointed with the interior size because it would only hold a small number of pens or pencils. To make amends I'm going to do another one soon which will be a bit bigger with a different design on the lid.
I will show it you as soon as it is done. In my next post I will also show you what my wife has been up to with here pyrography iron.
Happy new year to all of you. Let's hope it's a good one.
In my last post I showed you the drawing of the top of a pencil box. I managed to finish it over the Christmas period and give it to my wife as a present for her to keep her pretty pens in.
I made the box from a small piece of American cherry that was 4 inches wide, 18 inches long and a quarter of an inch thick. The sides of the box weren't very high so I did a single box joint on each corner. All of the cutting was done on my scroll saw. I used a size 12 blade for the straight cuts and a size five for the more intricate bits on the lid.
Cutting the lid was tricky in parts especially were the Damsel Fly met the reeds. I also had to leave some bits of wood intact and use my pyrography iron to complete the design. This can be seen on the bodies and heads of the Damsel Flies and the legs.
After cutting out the design and doing the pyrography work I cut out a piece of 3mm plywood and stuck it to the under side of the lid. Care had to be taken with the positioning because this would have to fit snugly into the top of the box to position the lid and stop it sliding off. Its other purpose was to stop the polymer clay, that I was going to use to fill the fretwork, from dropping out through the bottom of the lid.
The in lay work was done by mixing blue and yellow clays together to make a green, which was then pushed into the reeds with the back of a craft knife blade. For the body I used a blue clay with a little white added to give it the right hue.
Lastly, I did the wings. These were filled with a clay mixed from white and translucent. I didn't mix the clay thoroughly and this gave the wings a marbled look. The photo doesn't really do it justice because it worked out rather well.
After baking the lid in the oven, I used a very fine sand paper to rub it down and then gave it a coat of sanding sealer. Once that was dry, I gave it a couple of coats of varnish to finish it off then put a layer of felt on the inside and on the bottom of the box.
I was pleased with the way it turned out, but disappointed with the interior size because it would only hold a small number of pens or pencils. To make amends I'm going to do another one soon which will be a bit bigger with a different design on the lid.
I will show it you as soon as it is done. In my next post I will also show you what my wife has been up to with here pyrography iron.
Thursday, 26 December 2013
Drawing
Hi all,
I hope you had a very merry Christmas. We are still waiting for a house moving date so ours was a bit flat. Living without the internet is starting to irritate me something chronic. I am doing this post from a hot spot while I am balancing the laptop on my steering wheel so it won't be a long one.
I have just done a drawing for the top of a pencil box that I am doing for my wife. I intend to use my scroll saw to make the box from a piece of American cherry and use a mixture of inlay clay work and pyrography to fill in the design.
Hopefully, I will have in done in the next couple of days and if I can hunt out a hot spot I will show you the finished article. My wife has also taken up the pyrography iron again because she has packed all her paints and clays a little prematurely. Anyway, I should also be able to show you what she's been up to in my next post.
If you don't hear from me before, have a cracking new year; I might even crack open a tin of cider myself and welcome the new year with open arms.
I hope you had a very merry Christmas. We are still waiting for a house moving date so ours was a bit flat. Living without the internet is starting to irritate me something chronic. I am doing this post from a hot spot while I am balancing the laptop on my steering wheel so it won't be a long one.
I have just done a drawing for the top of a pencil box that I am doing for my wife. I intend to use my scroll saw to make the box from a piece of American cherry and use a mixture of inlay clay work and pyrography to fill in the design.
Hopefully, I will have in done in the next couple of days and if I can hunt out a hot spot I will show you the finished article. My wife has also taken up the pyrography iron again because she has packed all her paints and clays a little prematurely. Anyway, I should also be able to show you what she's been up to in my next post.
If you don't hear from me before, have a cracking new year; I might even crack open a tin of cider myself and welcome the new year with open arms.
Monday, 23 December 2013
Christmas
Hi all,
Sorry that my post have almost dried up but we are still waiting to move house. We cancelled our internet supplier on the 4th of December at our current address because the solicitors said we'd be moving on the 6th. They lied.
Well that turned out to be a load of rubbish and now it looks like mid January. The only good news on the horizon is that we decided to have BT for our new supplier and that is set up in the new house so when we get there all will be well. Going with BT also means that we can connect via some of their wi-fi hot spots and that is how I'm managing this post today.
However, it is very hit and miss because the hot spots seem to move or the signal drops out. We have system now where my wife sits in the passenger seat looking for hot spots with her kindle fire and when we find one I stop and log on with our old lap top. It is very slow and very frustrating but it's better than nothing. Having no proper internet connection is almost as bad as having a leg off.
I hope to get back to doing a bit of pyrography in the new year and hopefully will get my posts back to normal. 2013 was,'t a good year for me, so I'm hoping the next one will be better.
Whatever you are doing this Christmas, I hope you have a good one.
Sorry that my post have almost dried up but we are still waiting to move house. We cancelled our internet supplier on the 4th of December at our current address because the solicitors said we'd be moving on the 6th. They lied.
Well that turned out to be a load of rubbish and now it looks like mid January. The only good news on the horizon is that we decided to have BT for our new supplier and that is set up in the new house so when we get there all will be well. Going with BT also means that we can connect via some of their wi-fi hot spots and that is how I'm managing this post today.
However, it is very hit and miss because the hot spots seem to move or the signal drops out. We have system now where my wife sits in the passenger seat looking for hot spots with her kindle fire and when we find one I stop and log on with our old lap top. It is very slow and very frustrating but it's better than nothing. Having no proper internet connection is almost as bad as having a leg off.
I hope to get back to doing a bit of pyrography in the new year and hopefully will get my posts back to normal. 2013 was,'t a good year for me, so I'm hoping the next one will be better.
Whatever you are doing this Christmas, I hope you have a good one.
Monday, 9 December 2013
Hare Bells
Hi all,
Sorry it's been a while since I made a post but our house move is now a nightmare. Everything is a disaster because the solicitors and estate agents are a bunch of, well I won't say what until we are in our new abode. That is if it ever happens. We have had two moving dates that never happened and we are now waiting for the third. The phone line and Internet have been cancelled and our mail is being redirected. We still do not have a moving date and our solicitor can't even be bothered to ring us back.
Ah well, it'll soon be Christmas and if I'm lucky I'll get a turkey sandwich.
Needless to say, I haven't been doing much in the way of craft work. I did managed to do a small trinket pot pictured below with a small flower inlay.
I didn't make the box, I bought it. However, I am responsible for the hare bells on the lid. I drew the design onto a piece of paper and stuck it onto the lid with some temporary adhesive glue. I then used my scroll saw to cut out the pattern with a number 3 blade.
A lot of care was required on the pattern to make sure I didn't ruin it. Care was also required because when working on the lid the blade was very close to my fingers. One slip and my violin playing days would be over.
Once the pattern was cut out, I cut a small disc of plywood which I struck on the underside of the lid. The purpose of this was to stop the clay inlay from going straight through.
For the inlay, I mixed some blue and yellow clay for the stems and leaves and used two tones of blue for the actual hare bell flowers. The most tedious part was filling the design with the clay. I used the blade of a craft knife to make sure each part of the design was fully filled. Once that was done, I cooked the lid in the oven then gave it a coat of sanding sealer followed by a couple of coats of varnish.
This is only the third inlay I have done and I'm very happy with the results. I am desperate to get this house move out of the way so that I can combine scroll saw work, inlaying and pyrography in an artistic way. My head is full of ideas but I have decommissioned my scroll saw and other stuff is packed away in boxes.
Perhaps the new year will a change of circumstance and I can get stuck in again.
Sorry it's been a while since I made a post but our house move is now a nightmare. Everything is a disaster because the solicitors and estate agents are a bunch of, well I won't say what until we are in our new abode. That is if it ever happens. We have had two moving dates that never happened and we are now waiting for the third. The phone line and Internet have been cancelled and our mail is being redirected. We still do not have a moving date and our solicitor can't even be bothered to ring us back.
Ah well, it'll soon be Christmas and if I'm lucky I'll get a turkey sandwich.
Needless to say, I haven't been doing much in the way of craft work. I did managed to do a small trinket pot pictured below with a small flower inlay.
I didn't make the box, I bought it. However, I am responsible for the hare bells on the lid. I drew the design onto a piece of paper and stuck it onto the lid with some temporary adhesive glue. I then used my scroll saw to cut out the pattern with a number 3 blade.
A lot of care was required on the pattern to make sure I didn't ruin it. Care was also required because when working on the lid the blade was very close to my fingers. One slip and my violin playing days would be over.
Once the pattern was cut out, I cut a small disc of plywood which I struck on the underside of the lid. The purpose of this was to stop the clay inlay from going straight through.
For the inlay, I mixed some blue and yellow clay for the stems and leaves and used two tones of blue for the actual hare bell flowers. The most tedious part was filling the design with the clay. I used the blade of a craft knife to make sure each part of the design was fully filled. Once that was done, I cooked the lid in the oven then gave it a coat of sanding sealer followed by a couple of coats of varnish.
This is only the third inlay I have done and I'm very happy with the results. I am desperate to get this house move out of the way so that I can combine scroll saw work, inlaying and pyrography in an artistic way. My head is full of ideas but I have decommissioned my scroll saw and other stuff is packed away in boxes.
Perhaps the new year will a change of circumstance and I can get stuck in again.
Subscribe to:
Posts (Atom)







